Beta memo: at this time the forums and insider use two different registration and login systems.
We're working on unifying the process, so if you register with your same e-mail on the forums and insider we'll merge your accounts later.
To access the forums please use the login below. -Thanks.
Results 1 to 4 of 4
Thread: Inverted fields during download
-
7th May 2002, 16:29 #1
Member
- Join Date
- Apr 2002
- Posts
- 4
In my Smoke 3.6.1 (on Octane SE) when I output a clip, directly inserting it on a Digibeta, after this I see on my PAL monitor the video with the field dominance inverted, but the clip on the tape is ok! (This also happens on Flint 6.1.3 on the same Octane SE).
So I have to exit the Output Clip module and then reboot the machine almost every time ...quite boring, isn\'t it?
Is there anyone who encountered this problem before?
Thanks to everyone.
-
8th May 2002, 18:26 #2Guest
i used to have this problem but it´s not a problem of the workstation but of the recorder connected. there is some (i don´t know exactly anymore) EE menu setting that has to be changed in your betacam. maybe this will help?
-
9th May 2002, 14:41 #3
Member
- Join Date
- Apr 2002
- Posts
- 4
I\'ll try as soon as possible and, of course, I\'ll post the results. Thank you.
-
9th May 2002, 18:02 #4
Member
- Join Date
- Apr 2002
- Posts
- 10
The flicker is when play the clip too? Check your init.cfg and see if the Refresh rate of the Monitor is at 25Hzf. try ti chech the genlok too.
I had the same problem, but I set the 25Hzf in init.cfg and that\'s all right.
Reply With Quote