Beta memo: at this time the forums and insider use two different registration and login systems. We're working on unifying the process, so if you register with your same e-mail on the forums and insider we'll merge your accounts later. To access the forums please use the login below. -Thanks.
Results 1 to 2 of 2
2nd April 2007, 20:31 #1Member
- Join Date
- Mar 2007
Preview format switching question, Flint on Linux
In the System menu you can switch the preview from NTSC to 1920x1080psf, etc.
However, I only have one sync input on the linux PC. But the dvi ramp needs to lock to the right sync.
On Tezro you can have two sync refs so you can switch back and forth and then pick the correct input for your monitor and preview either or on your CRT or LCD preview monitor. If I am working in 5994 it's not a problem, but 2398 requires I change the sync.
Is this not the case for the linux configuration? Am I missing something?
it would be cool to have the flexibility to swap previews using this feature without re-patching sync.
3rd April 2007, 20:04 #2Member
- Join Date
- Jan 2003
Due to the hardware configuration of the Linux systems, you can only feed one sync into the system at a time.