- This topic has 3 replies, 3 voices, and was last updated 11 years, 8 months ago by .
-
Posts
-
Hey guys quick question
I’ve got some HD 1920 x 1080 footage, running at 30fps. Now i need it to run at 25 fps. I’ve tried timewarping the footage to double the length of frames in PAL interlacing it/dealing it. Problem is, the footage has been shot out a window of a car with the car travelling along, so when i perform this action the footage doesn’t really hold up. I was wondering if there’s anything else i could try. Would be really helpful if any of you could assist me, i know it’s the weekend and all but if you get a sec would me mega awesome.
Unkle
timewarp it to double the length of a 25fps version, but do a .2 to a .5 mix on the timewarp. then interlace it.
thats really the best you’d get.
or, can you run the footage frame for frame? it will play fast, but, is it a short scene? is it sync? can you get away with it?
randy
Ok Cool, i’ll give that a go changing the mix. Problem is, someone’s asked me to do this for a 12minute film, so sync would be an issue, everything would be an issue.
then you have no choice. try what i suggest. its the only way.
good luck.
randy
- You must be logged in to reply to this topic.