- This topic has 7 replies, 8 voices, and was last updated 13 years, 5 months ago by .
-
Posts
-
very bad green screen shot,poor light,with black edge around the racer ,i try to key it use masterkeyprimatte,but i cant get good result..
as a flame compsiter,i cant say i cant key out this shot,but i really cant key ti out..help!The modular keyer is your friend.
Dont get stuck on trying to make a key in one go, build it in several parts.
This way you have the freedon to tackle the problem areas one by one.
gl!well, if the guy doesn’t moves a lot, roto might be the best option based on a quality/time ratio.
-rayk
p.s.: tell the provider of the image to switch off any sharpening effects either on the camera or the scanner, next time.
Paint a clean frame, do a crushed differnce key,and roto the rest mate : )
Job Done! – NEXT : )
u need to use a combination of a color warper matte, AND the modular keyer.
i also have the problem,but i haven’t used the modular key,so who can send a picture processed by modular key,and i want to see the expert how to key the bad source like this.
thanks!good luck everyone!Try supress green color at CC and then try a diference with the original.
If it does not work properly, try it CW doing the same, select green watching the result matte and adjust the levels. Once you have the right matte, just process it.
Perhaps you have a green outline. If you have shappire, try using lens, mode fine lens, with the right matte and use the result as front.
It works perfectly.
thanks for all the anwer,i have tried all the methord,and get a good result
- You must be logged in to reply to this topic.