Combustion DeckLink Help Please

[Anonymous]

Thanks for your time.

I have installed a decklink extreme card for use with combustion in order to output my comps on an external NTSC monitor.

I am using the latest drivers, 5.2 and have tried older ones, but combustion does not see the decklink card as a framebuffer. I have installed the dirvers before installing combustion and I have tried installing combustion before the drivers but nothing works.

I know that it works, but there must be a conflict somewhere. I am running XP pro.

Any assitance is greatly appreciated. Thank you!

[kuban]

Have you checked if decklink works under windows itself? I mean out of combustion?

[Timor]

just to make sure: the 5.2 driver is not yet released, you probably have DeckLink 5.1.2 installed… ?

have you checked your desktop monitor settings to see that you have the decklink set to ntsc and 29 hertz?

you should then have the videomonitor acting as a third computer screen.

if you have pal selected you might encounter a problem with your ntsc- monitor.

hope this helps

timor

[Author]

Posts