- This topic has 2 replies, 3 voices, and was last updated 15 years, 11 months ago by .
Viewing 3 posts - 1 through 3 (of 3 total)
-
Posts
-
Hi. Is there a particular VTR cable I need to connect/control a Panasonic AJ-D640 VTR from Flame? Will a standard 9M-9M RS-422 work in conjunction with a gender changer to convert the Octane end to a female ? TIA.
If that VTR is compatible with RS422 Sony protocol, 1 to 1, 9pin cable won’t work with the octane. You have to connect different pins on both ends. But don’t remember the pin layout for octane now.
Octane Beta
2 (RX-) 2 (TX-)
3 (TX-) 8 (RX-)
4 (TX+) 3 (RX+)
6 (RX+) 7 (TX+)
5 (GND) 1,4,6,9 (GND)
Viewing 3 posts - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.