- This topic has 2 replies, 3 voices, and was last updated 10 years, 4 months ago by .
-
Posts
-
I need help on connecting flame 2011 system to a Miracube(model: G320S) 32″ monitor. Currently I have connected the monitor, but cannot get the right resolution working. Also any Anyone using stereoscopic 3d monitors with flames?
honestly, we couldn’t get it working either. we actually had 2 of them in our building for our creative showcase, and 3 miracube staff members, and the monitor kept on saying it was receiving some odd resolution…20-something by 19 something.
on dvi output you have to use monitor with resolution of 1920×1200 and on it you can use only anaglyph visualisation of stereoscopic material, so your monitor have to be conected on sdi video out from nvidia daughter card.
when using sdi out from a quadro with dual link out, you can choose between interlaced and dual separate left and right out.
so only way of using your monitor with a flame is to set your video preview to PAL/NTSC or HD 720p and use interlaced stereo output. and you’ll need a converter from sdi out to dvi to conect it. but it should convert without scaling so interlacing will not be lost.have fun
Vlad
- You must be logged in to reply to this topic.