Old Stone D9 Disk

Home Page forums Autodesk/Discreet Flame and Smoke Old Stone D9 Disk

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #203555
    Anonymous
    Inactive

    I have an old effect option 3 system (Don’t Laugh) & an attached D9 SCSI stone chassis.
    One of the drives has turned bad. The drive in question is labeled with a Discreet Logic sticker & is a Seagate ST19171WC full height SCSI drive.

    Due to the age of the system I have had problems locating (x 2) replacements from my local Autodesk office (Australia). Would anyone on board be able to steer me in the right direction to locate these drives?

    Thanks in Advance
    Timberoz>Craig

    #219018
    cyril conforti
    Participant

    That is going to be rough. I literally threw several of those into the dumpster a year or so ago.

    #219019
    Shannon Gans
    Participant

    I will have a look although I suspect I also threw out all of my older scsi and 9/18gb fibre disks.

    Chris

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.
Copy link
Powered by Social Snap