Forum Replies Created
-
Posts
-
Hi Folks !!!
I want to know if anyone saw the Flint/Smoke on Linux, how runs againts the Octane MXE 2×400 system. The Linux version is faster… Somebody says that is slow in I/O and in realtime playback, it’s possible.
We are evaluating the purchase of a new Linux system, because the manteniance is cheapper than with SGI.
Any comments will be apreciated.Thanks !!!
El Gato 😉
I agree 100 %
Mac as PC are tools among with the software, as a lot of people use thems, so now with the G5 a new kind of hard is comming like the Opteron PC machines a new 64-bit machines and I thin that for discreet is much easy to translate software codes from the IRIX 64-bit plattform to the MacOSX because both talk in UNIX lenguage, like Linux…
So I think that discreet will continue supporting Combustion, is this part of their bussisnes is good an they earn money, if not…Tha is my modest opinion.
El Gato
Hi, the problems says that you need to change the hd that is failind to know whats drive is take note of the drive error and look at the swr-config and unmont this drive an replace by another, must be the same type and brand and size.
Hola, el problema lo tienes en un disco duro, es el que te esta indicando la cansola, lo que tienes que hacer es reemplazar el disco por otro de igual marca y modelo y capacidada, para hacerlo debes ir al swr-config que esta en el directorio swr en el directorio discreet.
Espero que te sea util la ayuda.Saludos
Gato
A full Piranha cost about 75K plus the Octane, the Octane with Digital Video card is not more manufacture, so you can try to find one used, or buy a new Octane 2, but the Otcna e2 cames only with the new DM2 video unit and cost about 20K just the video board and is HD and SD. An Octane 2 with the video board and a V12 graphicas board cost about 50K. Wo will need to buy an array of disk too.
Meybe I’m wrong with the prices but is round it.
Bye [img]images/forum/smilies/icon_smile.gif[/img]The flicker is when play the clip too? Check your init.cfg and see if the Refresh rate of the Monitor is at 25Hzf. try ti chech the genlok too.
I had the same problem, but I set the 25Hzf in init.cfg and that’s all right.