[nw42]

Quote:

On 2002-07-26 04:12, Anonymous wrote: Go to the discreet support website at http://www.discreet.com/support/combustion There is a tip/tutorial which shows how you can create the write on effect with particles…..

Hi! I know the tip – it’s not exactly what I wanted but also very interesting…

ciao
nw42

[nw42]

Hi Jack!

thanks for your reply…

actualy I’m checking the discreet form – creative cow & world wide user groups – some times looking at fxguide

there is a lot to check out…

ciao
nw42

[ Edited by nw42 On Date _MONTHDATETIME ]

[nw42]

Hi!

You are looking for a good C2 machine?

Ready to handle more then PAL – then You need a dangerous weappon 🙂

You can buy one from BOXX Technologies or Alienware (for example)- or build Your individual system.

Some key specs to look at:

CPU: DUAL XEON or Athlon MP (only the top versions, because it makes no sense to use two slow cpu’s if you can get one fast…)

RAM: 4GB DDR-Ram PC266 is ok

HD: If You are working only with RAM a normal drive is ok – otherwise use a RAID array (Promise 4x WD 200GB = 800 GB with about 100 MB/s – or LVD-SCSI if You really need power)

Video Card: Nvidia GeForce 4 driven boards are ok for multi monitor support and GL rendering. (Nvidia Detonator driver working fine for me)

BE AWARE OF THE HARMFULL NOISE that such machines produce!

Use a dedicated server room or an advanst fluid cooling system…

I’m using a Dual Athlon MP 2000+ with 2GB RAM Segate Barracuda drives and GeForce II Ultra Graphics – this machine is damm fast and working is a joy 😉

greetings
nw42

[Author]

Posts